Product Downloads:
- Datasheet
- Manual
(Serial Numbers above 12200) - Manual
(Serial Numbers below 12200) - Installation Guide
- TorqView Datasheet
- Communications Protocol
- Transducer Display ETD Datasheet
Related Pages:
RWT310/320 Series
TorqSense Digital RWT310/320 Series transducers with integral electronics are available in three different body sizes for torque ranges up to 10,000Nm. The series offers a cost effective, non-contact digital rotary torque measurement solution, using TorqSense Surface Acoustic Wave technology, suitable for torque monitoring, testing or controlling drive mechanisms. TorqSense RWT310/320 series transducers and their technology are particularly appropriate for OEM applications.
If you require seperate electronics, please see our RWT330/340 Series transducers.
Key Benefits:
- Minimal shaft length - High shaft stiffness
- Low inertia - High Speed capability because electronics are not fixed on to shaft
- Non-contact measurement - simple RF couple for power/signal transmission
- High bandwidth
- 200% mechanical safe overload
- High accuracy and resolution
- Excellent noise immunity
- Integral digital electronics
- Operates both statically and dynamically - Clockwise and anti-clockwise
- Any full scale torque can be specified within the standard range: 1Nm through to 10,000Nm
- Sensors to monitor shaft temperature for better compensation and accuracy
- LED Status light
- Lifetime Warranty
TorqSense RWT310 Series transducers offer:
- Fixed voltage or current analog outputs (one for torque and the other for speed or power) for interfacing with legacy analog instrumentation
- BIT Self-diagnostics for letting the manufacturer know that the transducer torque or speed ratings have not been exceeded and the transducer's calibration date
- Simple 'fail' output pin
Whereas, TorqSense RWT320 Series transducers offer:
- 2 x user selectable voltage or current analog outputs (one for torque and the other for speed, power or peak torque) for interfacing with legacy analog instrumentation
- Digital outputs such as RS232 and USB for interfacing with modern instrumentation and laptops
- Digital input for configuring transducer via PC
- BIT Self-diagnostics for letting users know data is trustworthy, that the transducer torque or speed ratings have not been exceeded and the transducer's calibration date
- Transducer configuration software to allow user to changes transducer variables
- Ability to connect up to 10 transducers using USB
- Simple 'fail' output pin
