Facebook LinkedIn Google Plus. Twitter
Sensor Technology Limited
 

TorqSense® RWT350/360 Series

TorqSense Digital RWT350 & 360 series pulley/sprocket transducers are suitable for torque monitoring and process control on any belt / chain driven machinery. They offer separate electronics and sensor either with fixed outputs (RWT350 Series) or user selectable outputs (RWT360 Series). USB and RS232 outputs are also available for direct PC interface.

Key Benefits:

  • Direct replacement for standard pulley / spocket
  • Low inertia - High Speed capability because electronics are not fixed on to shaft
  • Non-contact measurement - simple RF couple for power/signal transmission
  • High bandwidth
  • 200% mechanical safe overload
  • High accuracy and resolution
  • Excellent noise immunity
  • Integral digital electronics
  • Operates both statically and dynamically - Clockwise and anti-clockwise
  • Any full scale torque can be specified within the standard range: 100Nm through to 10,000Nm
  • Lifetime Warranty

Please contact us if you require a torque range greater than 10,000Nm.

TorqSense RWT350 series transducers offer:

  • Fixed voltage or current analog outputs (one for torque and the other for speed or power) for interfacing with legacy analog instrumentation
  • BIT Self-diagnostics for letting the manufacturer know that the transducer's torque, speed ratings and calibration due date have not been exceeded
  • Simple 'Fail' output pin
  • Sensors to monitor shaft temperature for better compensation and accuracy

Whereas TorqSense RWT360 series transducers offer:

  • 2x user selectable voltage or current analog outputs (one for torque and the other for speed, power or peak torque) for interfacing with legacy analog instrumentation
  • Digital outputs, such as RS232, CANbus and USB, for interfacing with modern instrumentation and laptops
  • Digital input for configuring transducer via PC
  • BIT Self-diagnostics for letting users know data is trustworthy, that the transducer's torque, speed ratings and calibration due date have not been exceeded
  • Transducer configuration software to allow user to changes transducer variables
  • Ability to connect up to 10 transducers using USB
  • Simple 'Fail' output pin
  • Sensors to monitor shaft temperature for better compensation and accuracy