Digital Rotary Torque Transducers – SGR520/SGR521/SGR522

Our TorqSense rotary strain gauge transducers use non contact technology, eliminating the need for noisy slip rings. They are suitable for torque measuring, testing, feedback and control of drive mechanisms and process control applications.

The SGR series transducers use modern strain gauge signal conditioning techniques to provide a high bandwidth, low cost torque measuring solution with high overrange, and overload capabilities and a wide range of digital outputs.

Key Benefits

• Transducers from 175mNm to 13000Nm
• Accuracy ±0.1%
• High mechanical overload 400%
• Overrange reading 250%
• High digital sample rate of 4000 samples per second
• Digital outputs – RS232 and USB (standard), CANbus and Ethernet (optional).
• Compatible with TorqView Advanced Torque Monitoring Software
• Non contact signal transmission, no slip rings to wear out
• Lifetime Warranty

Other Features

• BIT Self-diagnostics – Diagnostic system checks internal systems and operational conditions for faults, and monitors torque, speed and temperature for overscale conditions.
• Transducer status LED and simple “Sensor status” output pin, provides transducer health feedback.
• Sensors to monitor shaft temperature for better compensation and accuracy.
• Transducer Control software is provided to setup and configure the transducer.
• 3 analog channels are individually configurable, allowing changes to scaling and data assignment.
• Ability to connect up to 10 transducers using USB.
• Minimal side and end load errors
• Low linearity deviation of ± 0.05 % FSD
• Low hysteresis error of ± 0.05 % FSD
• Zero variation in torque signal with rotation (cyclic variation)
• Wide power supply range 12-32 VDC